Walk-In Shower Ideas
Walk-In Shower Ideas for Westchester County Primary Baths
Nine design elements that define a luxury walk-in shower — and how we incorporate them into Westchester County primary bathroom renovations.
Frameless glass enclosure
The single most impactful visual upgrade in a primary bath shower. Frameless glass reads cleaner, brighter, and more luxurious than framed or semi-frameless alternatives.
Large-format tile walls
24×48 or larger porcelain slab tiles create a near-seamless look with minimal grout lines. Book-matched pairs create a dramatic focal wall.
Built-in bench
A fully tiled built-in bench for steam showers and for comfortable use. Positioned along the back or side wall. Sized 18×18 minimum, cantilevered or supported.
Recessed niches
Fully tiled recessed shelves built into the shower wall — one at shoulder height for frequently used bottles, one lower for rarely used items. Waterproofed with linear drain slope.
Thermostatic shower system
Thermostat-controlled shower valve with separate volume controls — so the shower pre-heats to your preferred temperature before you step in. Common in Westchester luxury baths (Kohler, Hansgrohe, Grohe).
Body sprays
Horizontal body spray outlets at shoulder and hip height for a full-body spray experience. Requires increased water flow — confirm with your plumber that supply pressure supports the configuration.
Rain showerhead
Ceiling-mount or extended arm rain showerhead for an overhead waterfall effect. 10" minimum diameter for a genuine rain effect; 12–16" for a true spa experience.
Curbless (zero-threshold) entry
No threshold — the shower floor is flush or nearly flush with the bathroom floor. Requires a linear drain to direct water. Creates a clean, accessible, and visually open shower.
Steam shower system
Sealed shower enclosure with steam generator (typically in an adjacent cabinet), steam outlet, thermostat, and sealed glass door. Requires ceiling height under 8 feet and adequate electrical service.
Walk-In Shower FAQ
What size should a walk-in shower be?
A walk-in shower should be at least 36×36 inches to function comfortably, but 48×36 or larger is recommended for luxury bathrooms. In Westchester County primary baths, showers of 60×36 to 72×48 (or larger, with a bench) are common. The ideal size depends on your available square footage and the fixture configuration you want.
What is the difference between a walk-in shower and a steam shower?
A walk-in shower is any open shower with a curbless or minimal-threshold entry and glass enclosure. A steam shower adds a steam generator, sealed enclosure (so steam is contained), and a steam outlet — converting the shower into a therapeutic steam environment. Steam requires a fully enclosed shower with a ceiling height no more than 8 feet.
How much does a walk-in shower conversion cost in Westchester?
A full tub-to-shower conversion in a Westchester County primary bath typically runs $15,000–$35,000 — including drain relocation, large-format tile, niche(s), bench, frameless glass enclosure, and a thermostatic shower system. A steam shower system adds $4,000–$8,000 to that cost.
Two Showrooms · No Appointment Necessary
Design Your Walk-In Shower
We design primary bathroom showers as part of your complete bathroom renovation — sized for your space, built for how you live.