Project Detail
The Shower: Curbless Large-Format Porcelain
The original shower was reconfigured and expanded by 12 inches by reclaiming space from an unused linen closet. The new shower is curbless with a linear drain running the full width at the back wall — a detail that makes the floor feel continuous and makes cleaning effortless. The tile is a 24x48 matte white porcelain in a full-height vertical stack on three walls, with a single 12-inch horizontal band of aged brass mosaic creating a deliberate accent line at eye height. The glass enclosure is frameless 3/8-inch tempered glass with minimal aged brass hardware.
The Vanity: Custom Double with Integrated Medicine Cabinets
The original builder vanity was replaced with a custom floating vanity in a slab-front, flat-panel design in a warm greige stained white oak veneer. The vanity runs the full 72-inch width of the available wall, with two undermount sinks and a quartz top in Silestone Desert Silver — a warm grey that coordinates with the tile without matching it. Above each sink, recessed medicine cabinets with built-in LED lighting eliminate the need for surface-mounted sconces while providing excellent task lighting and significant storage.
Heated Floors and Thermostatic Controls
The floor is a 12x24 Carrara marble tile — honed, not polished — running in a linear offset pattern that follows the direction of the room. Beneath the marble, a Nuheat electric radiant mat heats the floor to a set temperature through a programmable thermostat. The shower operates through a Kohler DTV+ thermostatic system with two outlets — overhead rain head and handshower. The system is programmable — the shower temperature and outlet configuration can be set from a wall-mounted touchpad.